Use EventBus and Trigger

This document gives an example of how to use EventBus and Trigger.

Prerequisites

You need to create a function as the target function to be triggered. Please refer to Create a function for more details.
You need to create a Kafka cluster. Please refer to Create a Kafka cluster for more details.

Deploy an NATS streaming server

Run the following commands to deploy an NATS streaming server. This document uses nats://nats.default:4222 as the access address of the NATS streaming server and stan as the cluster ID. For more information, see NATS Streaming (STAN).

helm repo add nats https://nats-io.github.io/k8s/helm/charts/
helm install nats nats/nats
helm install stan nats/stan --set stan.nats.url=nats://nats:4222

Create an OpenFuncAsync Runtime Function

Use the following content to create a configuration file (for example, openfuncasync-function.yaml) for the target function, which is triggered by the Trigger CRD and prints the received message.

apiVersion: core.openfunction.io/v1beta2
kind: Function
metadata:
  name: trigger-target
spec:
  version: "v1.0.0"
  image: openfunctiondev/v1beta1-trigger-target:latest
  serving:
    scaleOptions:
      keda:
        scaledObject:
          pollingInterval: 15
          minReplicaCount: 0
          maxReplicaCount: 10
          cooldownPeriod: 30
        triggers:
          - type: stan
            metadata:
              natsServerMonitoringEndpoint: "stan.default.svc.cluster.local:8222"
              queueGroup: "grp1"
              durableName: "ImDurable"
              subject: "metrics"
              lagThreshold: "10"
    triggers:
      dapr:
        - name: eventbus
          topic: metrics
    pubsub:
      eventbus:
        type: pubsub.natsstreaming
        version: v1
        metadata:
          - name: natsURL
            value: "nats://nats.default:4222"
          - name: natsStreamingClusterID
            value: "stan"
          - name: subscriptionType
            value: "queue"
          - name: durableSubscriptionName
            value: "ImDurable"
          - name: consumerID
            value: "grp1"

Run the following command to apply the configuration file.
```
kubectl apply -f openfuncasync-function.yaml
```

Create an EventBus and an EventSource

Use the following content to create a configuration file (for example, eventbus.yaml) for an EventBus.

apiVersion: events.openfunction.io/v1alpha1
kind: EventBus
metadata:
  name: default
spec:
  natsStreaming:
    natsURL: "nats://nats.default:4222"
    natsStreamingClusterID: "stan"
    subscriptionType: "queue"
    durableSubscriptionName: "ImDurable"

Use the following content to create a configuration file (for example, eventsource.yaml) for an EventSource.

Note

Set the name of the event bus through spec.eventBus.

apiVersion: events.openfunction.io/v1alpha1
kind: EventSource
metadata:
  name: my-eventsource
spec:
  logLevel: "2"
  eventBus: "default"
  kafka:
    sample-two:
      brokers: "kafka-server-kafka-brokers.default.svc.cluster.local:9092"
      topic: "events-sample"
      authRequired: false

Run the following commands to apply these configuration files.

kubectl apply -f eventbus.yaml
kubectl apply -f eventsource.yaml

Run the following commands to check the results.

$ kubectl get eventsources.events.openfunction.io
NAME             EVENTBUS   SINK   STATUS
my-eventsource   default           Ready

$ kubectl get eventbus.events.openfunction.io
NAME      AGE
default   6m53s

$ kubectl get components
NAME                                                 AGE
serving-6r5dl-component-eventbus-jlpqf               11m
serving-9689d-component-ebfes-my-eventsource-cmcbw   6m57s
serving-9689d-component-esc-kafka-sample-two-l99cg   6m57s
serving-k6zw8-component-cron-9x8hl                   61m
serving-k6zw8-component-kafka-server-sjrzs           61m

$ kubectl get deployments.apps
NAME                                       READY   UP-TO-DATE   AVAILABLE   AGE
serving-6r5dl-deployment-v100-m7nq2        0/0     0            0           12m
serving-9689d-deployment-v100-5qdvk        1/1     1            1           7m17s

Note

In the case of using the event bus, the workflow of the EventSource controller is described as follows:

Create an EventSource custom resource named my-eventsource.
Retrieve and reorganize the configuration of the EventBus, including the EventBus name (default in this example) and the name of the Dapr component associated with the EventBus.
Create a Dapr component named serving-xxxxx-component-ebfes-my-eventsource-xxxxx to enable the EventSource to associate with the event bus.
Create a Dapr component named serving-xxxxx-component-esc-kafka-sample-two-xxxxx to enable the EventSource to associate with the event source.
Create a Deployment named serving-xxxxx-deployment-v100-xxxxx for processing events.

Create a Trigger

Use the following content to create a configuration file (for example, trigger.yaml) for a Trigger.
Note
- Set the event bus associated with the Trigger through spec.eventBus.
- Set the event input source through spec.inputs.
- This is a simple trigger that collects events from the EventBus named default. When it retrieves a sample-two event from the EventSource my-eventsource, it triggers a Knative service named function-sample-serving-qrdx8-ksvc-fwml8 and sends the event to the topic metrics of the event bus at the same time.
```
apiVersion: events.openfunction.io/v1alpha1
kind: Trigger
metadata:
  name: my-trigger
spec:
  logLevel: "2"
  eventBus: "default"
  inputs:
    inputDemo:
      eventSource: "my-eventsource"
      event: "sample-two"
  subscribers:
    - condition: inputDemo
      topic: "metrics"
```
Run the following command to apply the configuration file.
```
kubectl apply -f trigger.yaml
```
Run the following commands to check the results.
```
$ kubectl get triggers.events.openfunction.io
NAME         EVENTBUS   STATUS
my-trigger   default    Ready

$ kubectl get eventbus.events.openfunction.io
NAME      AGE
default   62m

$ kubectl get components
NAME                                                 AGE
serving-9689d-component-ebfes-my-eventsource-cmcbw   46m
serving-9689d-component-esc-kafka-sample-two-l99cg   46m
serving-dxrhd-component-eventbus-t65q7               13m
serving-zwlj4-component-ebft-my-trigger-4925n        100s
```
Note
In the case of using the event bus, the workflow of the Trigger controller is as follows:
1. Create a Trigger custom resource named my-trigger.
2. Retrieve and reorganize the configuration of the EventBus, including the EventBus name (default in this example) and the name of the Dapr component associated with the EventBus.
3. Create a Dapr component named serving-xxxxx-component-ebft-my-trigger-xxxxx to enable the Trigger to associatie with the event bus.
4. Create a Deployment named serving-xxxxx-deployment-v100-xxxxx for processing trigger tasks.

Create an Event Producer

Use the following content to create an event producer configuration file (for example, events-producer.yaml).

apiVersion: core.openfunction.io/v1beta2
kind: Function
metadata:
  name: events-producer
spec:
  version: "v1.0.0"
  image: openfunctiondev/v1beta1-bindings:latest
  serving:
    template:
      containers:
        - name: function
          imagePullPolicy: Always
    triggers:
      dapr:
        - name: cron
          type: bindings.cron
    outputs:
      - dapr:
          name: kafka-server
          operation: "create"
    bindings:
      cron:
        type: bindings.cron
        version: v1
        metadata:
          - name: schedule
            value: "@every 2s"
      kafka-server:
        type: bindings.kafka
        version: v1
        metadata:
          - name: brokers
            value: "kafka-server-kafka-brokers:9092"
          - name: topics
            value: "events-sample"
          - name: consumerGroup
            value: "bindings-with-output"
          - name: publishTopic
            value: "events-sample"
          - name: authRequired
            value: "false"

Run the following command to apply the configuration file.
```
kubectl apply -f events-producer.yaml
```

Run the following commands to observe changes of the target asynchronous function.

$ kubectl get functions.core.openfunction.io
NAME                                  BUILDSTATE   SERVINGSTATE   BUILDER   SERVING         URL                                   AGE
trigger-target                        Skipped      Running                  serving-dxrhd                                         20m

$ kubectl get po --watch
NAME                                                     READY   STATUS              RESTARTS   AGE
serving-dxrhd-deployment-v100-xmrkq-785cb5f99-6hclm      0/2     Pending             0          0s
serving-dxrhd-deployment-v100-xmrkq-785cb5f99-6hclm      0/2     Pending             0          0s
serving-dxrhd-deployment-v100-xmrkq-785cb5f99-6hclm      0/2     ContainerCreating   0          0s
serving-dxrhd-deployment-v100-xmrkq-785cb5f99-6hclm      0/2     ContainerCreating   0          2s
serving-dxrhd-deployment-v100-xmrkq-785cb5f99-6hclm      1/2     Running             0          4s
serving-dxrhd-deployment-v100-xmrkq-785cb5f99-6hclm      1/2     Running             0          4s
serving-dxrhd-deployment-v100-xmrkq-785cb5f99-6hclm      2/2     Running             0          4s

Feedback

Was this page helpful?

Glad to hear it! Please tell us how we can improve.

Sorry to hear that. Please tell us how we can improve.